Aerobed Raised Signature Comfort Airbed Manuel d'utilisateur télécharger pdf

DEFLATION AND STORAGE

1. There are three ways to deflate your AeroBed; turn the pump to deflate position and let the pump do the work, open the quick air release valve and

let the air flow out or use the pump and valve in combination. Deflation is under one minute.

2. For most compact storage, close valve, turn dial on pump to deflate position. Bed will begin to deflate automatically. Once bed has expelled all air,

turn dial to neutral position.

3. Roll or fold the AC cord and secure it. Fold sides of bed into the center along its length. Tightly roll and place in convenient

carry bag for easy transport and storage.

4. Store your AeroBed in a clean, dry place at room temperature (above 50°F/10°C). Storing your AeroBed under 50°F (10°C)

and over 100°F (38°C) may affect its performance and will not be covered under warranty.

8109 Rev 9/09

Pump 3111RFI NW F2/DV

Instruction Manual

This is the closed position. Open Air Release Valve Close Valve Using 2 Thumbs

INFLATION

NOTE: BED MUST BE AT ROOM TEMPERATURE PRIOR TO INFLATING OR IT MAY CAUSE AIR LEAKS.

Remove your AeroBed from its lightweight duffle bag. Keep bag for storage.

1. Place your rolled-up bed on the floor free of obstructions or sharp objects.

2. Make certain the Quick Release Valve is closed. Bed should be stored with valve in the closed and latched

position. If the Quick Release Valve is open, close it by using 2 thumbs to push cover and snap into valve. Be careful to avoid

pushing valve cover to the right or left as it snaps into the valve opening.

3. Remove AC plug and cord from plastic bag and shrink wrap.

4. Plug into any standard polarized 110 Volt AC electrical outlet. North American Electrical rating: 120 VAC 60HZ 1.10A (Note: 230VAC product

sold outside of North America). This product has a polarized attachment plug (one blade is wider than the other) as a safety feature. This plug

will fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.

5. Turn dial on pump to “inflate” position. Bed will inflate hands-free. When desired firmness is reached, turn dial to neutral position.

6. To adjust firmness level, slowly turn dial on pump to adjust position. Pump will slowly release air. Turn pump to neutral position once you reach

your desired firmness level. To add more air, repeat step 5.

IMPORTANT: PUMP HAS POWER INDICATOR LIGHT AND RESETTABLE FUSE WITH AUTO SHUT-OFF FEATURE. IF PUMP RUNS FOR

APPROXIMATELY 15 CONSECUTIVE MINUTES, THE AUTO SHUT-OFF FEATURE WILL ENGAGE TURNING THE PUMP OFF. THE PUMP WILL

RESET ITSELF WITHIN 30 MINUTES ONCE THE MOTOR IS COOL. THE POWER INDICATOR LIGHT WILL REMAIN ON AS LONG AS THE BED

IS PLUGGED INTO THE ELECTRICAL OUTLET.

DEFLATE

INFLATE

SILENT

ADJUST

POWER

INDICATOR

Thank you for joining the AeroBed

family by purchasing one of our products. You can expect top-notch quality, innovation and imagination from every AeroBed product.

You are about to enjoy the comfort of an AeroBed product. It is your responsibility to read and always follow the safety, care and maintenance instructions for your new

AeroBed product. Always instruct and supervise others on your bed’s proper use, maintenance and safety.

IMPORTANT SAFETY INFORMATION AND WARNINGS

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

IMPORTANT: Preparation of your product requires no tools. Use of tools may damage your bed.

WARNING: This is an electrical product – not a toy. To avoid risk of fire, burns, injury, or shock:

- Always unplug from outlet when not in use and before cleaning.

- Close supervision is necessary when this product is used by or near children, invalids, or disabled persons.

- Use this product only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

- Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.

- Keep the cord away from heated surfaces.

- Never operate the product with the air openings blocked. Keep the air openings free of lint, hair, and the like.

- Never drop or insert any object into any opening.

- To disconnect, turn all controls to off position, then remove plug from outlet.

WARNING: Product is for indoor use only. Do not use outdoors. For household / residential use only.

WARNING: This furnishing has not been evaluated for flammability or cigarette ignition resistance.

ADDITIONAL WARNINGS:

- Bed supports a maximum weight of 300 lbs. per person.

- This is not a water toy. Use as a mattress only.

- This bed is not designed for use by children under 3 years of age or any persons with limited mobility as they could suffer serious or fatal injury through suffocation, falling from

or rolling off the bed or becoming trapped.

- Use on flat surfaces only. Bed may tip over on uneven surfaces.

- Inflate bed fully. Partially inflated mattresses can cause suffocation.

- Remove all sharp objects from area where bed will be set up and used. Do not use this bed on abrasive surfaces or near pointed/sharp items or surfaces. Bed may puncture.

- Do not step or jump on bed or use as a trampoline.

- This bed is made of plastic and therefore may melt or burn if it comes in contact with any flame or heat source. Do not place it near or against heaters,

open flame, or other hot objects.

- Pump is not intended for continuous use. Pump may stop working or overheat if it is used for extended periods of time. Do not use pump continuously

for more than 4 minutes. To avoid excessive heat build-up in the pump, let it rest for 5 minutes between complete inflation cycles.

- Do not attempt to disassemble, repair, or service the pump. No serviceable parts are contained inside.

Contact Aero Products International, Inc. at 1834 Walden Office Square, Third Floor, Schaumburg, IL 60173, 1-888-462-4468

for repair or servicing information.

A REPAIR PATCH CAN BE ORDERED AT WWW.AEROBED.COM OR BY CALLING OUR CUSTOMER SERVICE AT 1-888-462-4468.

1 2

Résumé du contenu

Page 1 - Instruction Manual

DEFLATION AND STORAGE1. There are three ways to deflate your AeroBed; turn the pump to deflate position and let the pump do the work, open the quick a

Page 2 - CARE AND MAINTENANCE

Mattress Cover (if included) Machine wash separately in warm water, gentle cycle using mild soap or detergent. Do not bleach. Tumble dry with low heat

Commentaires sur ces manuels

Pas de commentaire

Aerobed Raised Signature Comfort Airbed Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Aerobed Raised Signature Comfort Airbed. AeroBed Raised Signature Comfort Airbed User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Aerobed Raised Signature Comfort Airbed