Aerobed Travel for Two Airbed Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Aerobed Travel for Two Airbed. AeroBed Travel for Two Airbed User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
DEFLATION AND STORAGE
1. To deflate your AeroBed, open the large valve at the foot of the bed by turning the valve cover counter clockwise.
2. Press red button on black valve flap with finger until it locks into the open position and all air expels.
3. For most compact storage, close valve, turn dial to deflate. Once excess air is released, turn dial to neutral position.
4. Roll or fold the AC cord and secure it. Fold sides of bed into the center along its length. Tightly roll and place bed in
convenient carry bag for easy storage and transport.
5. Store your AeroBed in a clean, dry place at room temperature (above 50°F/10°C). Storing your AeroBed under 50°F (10°C)
and over 100°F (38°C) may affect its performance and will not be covered under warranty.
Thank you for joining the AeroBed
®
family by purchasing one of our upscale products. You can expect top-notch quality, innovation and imagination from every AeroBed
product. You are about to enjoy the comfort of an AeroBed product. It is your responsibility to read and always follow the safety, care and maintenance instructions for
your new AeroBed product. Always instruct and supervise others on your bed’s proper use, maintenance and safety.
IMPORTANT: Preparation of your AeroBed product requires no tools. Use of tools may damage your bed.
8077 Rev 11/09
Pump 2110RF F1/BMV
Instruction Manual
INFLATION
NOTE: BED MUST BE AT ROOM TEMPERATURE PRIOR TO INFLATING OR IT MAY CAUSE AIR LEAKS.
Remove your AeroBed from its lightweight duffle bag. Keep bag for storage.
1. Place your rolled-up bed on the floor free of obstructions or sharp objects.
2. Remove AC plug and cord from plastic bag and shrink wrap.
3. Plug into any standard polarized 110 Volt AC electrical outlet. North American Electrical rating: 120 VAC 60HZ 1.10A
(Note: 230 VAC product sold outside of North America). This product has a polarized attachment plug (one blade is wider
than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug
can be fully inserted. Do not attempt to defeat this safety feature.
4. Make certain the valve cap located at the foot of the bed is closed. If valve cap is open, close it by turning clockwise.
5. Turn dial on pump to “inflate” position. Bed will inflate hands-free. When desired firmness is reached, turn dial to neutral position.
6. To adjust firmness level, slowly turn dial on pump to adjust position. Pump will slowly release air. Turn pump to
neutral position once you reach your desired firmness level. To add more air, repeat step 5.
IMPORTANT: PUMP HAS RESETTABLE FUSE WITH AUTO SHUT-OFF FEATURE. IF PUMP RUNS FOR APPROXIMATELY 10
CONSECUTIVE MINUTES, THE AUTO SHUT-OFF FEATURE WILL ENGAGE WHICH WILL ALLOW THE MOTOR TO COOL.
PUMP WILL AUTOMATICALLY RESET ITSELF IN APPROXIMATELY 30 MINUTES.
ADJUST
DEFLATE
INFLATE
IMPORTANT SAFETY INFORMATION AND WARNINGS
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
IMPORTANT: Preparation of your product requires no tools. Use of tools may damage your bed.
WARNING: This is an electrical product – not a toy. To avoid risk of fire, burns, injury, or shock:
- Unplug from outlet when not in use
- Close supervision is necessary when this product is used by or near children, invalids, or disabled persons.
- Use this product only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
- Keep the cord away from heated surfaces.
- Never operate the product with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
WARNING: Product is for indoor use only. For household / residential use only.
WARNING: This furnishing has not been evaluated for flammability or cigarette ignition resistance.
ADDITIONAL WARNINGS:
- This is not a water toy. Use as a mattress only.
- This bed is not designed for use by children under 3 years of age or any persons with limited mobility as they could suffer
serious or fatal injury through suffocation, falling from or rolling off the bed or becoming trapped.
- Use on flat surfaces only. Bed may tip over on uneven surfaces.
- Inflate bed fully. Partially inflated mattresses can cause suffocation.
- Remove all sharp objects from area where bed will be set up and used. Do not use this bed on abrasive surfaces or near pointed/sharp items or surfaces. Bed may puncture.
- Do not step or jump on bed or use as a trampoline.
- This bed is made of plastic and therefore may melt or burn if it comes in contact with any flame or heat source. Do not place it near or against heaters, open
flame, or other hot objects.
- Unplug product when not in use.
- Pump is not intended for continuous use. Pump may stop working or overheat if it is used for extended periods of time. Do not use pump continuously for more than
4 minutes. To avoid excessive heat build up in the pump, let it rest for 5 minutes between complete inflation and deflation cycles.
- Do not attempt to disassemble, repair, or service the pump. No serviceable parts are contained inside.
Contact Aero Products International, Inc. at 1834 Walden Office Square, Third Floor, Schaumburg, IL 60173, 1-888-462-4468 for repair or
servicing information.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Instruction Manual

DEFLATION AND STORAGE1. To deflate your AeroBed, open the large valve at the foot of the bed by turning the valve cover counter clockwise. 2. Press re

Page 2 - CARE AND MAINTENANCE

LIMITED EXPRESS WARRANTYAero Products International, Inc. (“us”) warrants to the original purchaser (“you”) that the AeroBed (“product”) is guaranteed

Commentaires sur ces manuels

Pas de commentaire